Новость: Новый стабильный Linux - 2.6.11.3
(Категория: Linux)
Добавил Roman I Khimov
Воскресенье, 13 Март 2005, 12:15
Грег Кроа-Хартман (Greg Kroah-Hartman) сегодня выпустил в свет новую стабильную версию Linux. Вошедшие патчи несколько дней тестировались и так как проблем обнаружено не было, был выпущен 2.6.11.3.
Теперь патч для стабильной ветки можно скачать относительно версии 2.6.11, минуя необходимость качать ранее выпущенные версии -stable. Сделать это можно во вполне привычном месте: ftp://ftp.ru.kernel.org/pub/linux/kernel/v2.6/patch-2.6.11.3.bz2 . Размеры даже этого патча в пять раз меньше просматриваемой вами сейчас страницы.
Но доступны и инкрементальные патчи, опать-таки, где им и положено быть: ftp://ftp.ru.kernel.org/pub/linux/kernel/v2.6/incr
Полный Changelog доступен здесь, а короткая статистика и патч относительно 2.6.11.2 следуют далее:
Патч относительно 2.6.11.2:
Источник этой новости Центр информации по операционным системам
( http://www.osrc.info/news.php?extend.2121 )
(Категория: Linux)
Добавил Roman I Khimov
Воскресенье, 13 Март 2005, 12:15
Грег Кроа-Хартман (Greg Kroah-Hartman) сегодня выпустил в свет новую стабильную версию Linux. Вошедшие патчи несколько дней тестировались и так как проблем обнаружено не было, был выпущен 2.6.11.3.
Теперь патч для стабильной ветки можно скачать относительно версии 2.6.11, минуя необходимость качать ранее выпущенные версии -stable. Сделать это можно во вполне привычном месте: ftp://ftp.ru.kernel.org/pub/linux/kernel/v2.6/patch-2.6.11.3.bz2 . Размеры даже этого патча в пять раз меньше просматриваемой вами сейчас страницы.
Но доступны и инкрементальные патчи, опать-таки, где им и положено быть: ftp://ftp.ru.kernel.org/pub/linux/kernel/v2.6/incr
Полный Changelog доступен здесь, а короткая статистика и патч относительно 2.6.11.2 следуют далее:
Makefile | 2 +-
arch/ppc/oprofile/op_model_fsl_booke.c | 3 +--
arch/ppc/platforms/4xx/ebony.h | 4 ++--
arch/ppc/platforms/4xx/luan.h | 6 +++---
arch/ppc/platforms/4xx/ocotea.h | 4 ++--
drivers/char/drm/drm_ioctl.c | 2 ++
drivers/media/video/adv7170.c | 2 +-
drivers/media/video/adv7175.c | 2 +-
drivers/media/video/bt819.c | 2 +-
drivers/media/video/saa7110.c | 33 ++++++++++++++++-----------------
drivers/media/video/saa7114.c | 2 +-
drivers/media/video/saa7185.c | 2 +-
drivers/net/r8169.c | 17 ++++++++++-------
drivers/net/sis900.c | 30 ++++++++++++++----------------
drivers/net/via-rhine.c | 3 +++
drivers/pci/hotplug/pciehp_ctrl.c | 3 ++-
fs/cramfs/inode.c | 1 +
net/ipv4/tcp_timer.c | 1 +
18 files changed, 63 insertions(+), 56 deletions(-)
Summary of changes from v2.6.11.2 to v2.6.11.3
==============================================
Alexander Nyberg:
o PCI: fix hotplug double free
David S. Miller:
o [TCP]: Put back tcp_timer_bug_msg[] symbol export
Egbert Eich:
o drm missing memset can crash X server
Eric Lammerts:
o cramfs: small stat(2) fix
Greg Kroah-Hartman:
o Linux 2.6.11.3
Herbert Xu:
o sis900 kernel oops fix
Jean Delvare:
o fix amd64 2.6.11 oops on modprobe (saa7110)
o Fix i2c messsage flags in video drivers
Kumar Gala:
o ppc32: trivial fix for e500 oprofile build
Matt Porter:
o ppc32: Compilation fixes for Ebony, Luan and Ocotea
Olof Johansson:
o [VIA RHINE] older chips oops on shutdown
Stephen Hemminger:
o r8169: receive descriptor length fixПатч относительно 2.6.11.2:
diff -Nru a/Makefile b/Makefile
--- a/Makefile 2005-03-12 22:45:06 -08:00
+++ b/Makefile 2005-03-12 22:45:06 -08:00
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 11
-EXTRAVERSION = .2
+EXTRAVERSION = .3
NAME=Woozy Numbat
# *DOCUMENTATION*
diff -Nru a/arch/ppc/oprofile/op_model_fsl_booke.c b/arch/ppc/oprofile/op_model_fsl_booke.c
--- a/arch/ppc/oprofile/op_model_fsl_booke.c 2005-03-12 22:45:06 -08:00
+++ b/arch/ppc/oprofile/op_model_fsl_booke.c 2005-03-12 22:45:06 -08:00
@@ -150,7 +150,6 @@
int is_kernel;
int val;
int i;
- unsigned int cpu = smp_processor_id();
/* set the PMM bit (see comment below) */
mtmsr(mfmsr() | MSR_PMM);
@@ -162,7 +161,7 @@
val = ctr_read(i);
if (val < 0) {
if (oprofile_running && ctr[i].enabled) {
- oprofile_add_sample(pc, is_kernel, i, cpu);
+ oprofile_add_pc(pc, is_kernel, i);
ctr_write(i, reset_value[i]);
} else {
ctr_write(i, 0);
diff -Nru a/arch/ppc/platforms/4xx/ebony.h b/arch/ppc/platforms/4xx/ebony.h
--- a/arch/ppc/platforms/4xx/ebony.h 2005-03-12 22:45:06 -08:00
+++ b/arch/ppc/platforms/4xx/ebony.h 2005-03-12 22:45:06 -08:00
@@ -61,8 +61,8 @@
*/
/* OpenBIOS defined UART mappings, used before early_serial_setup */
-#define UART0_IO_BASE (u8 *) 0xE0000200
-#define UART1_IO_BASE (u8 *) 0xE0000300
+#define UART0_IO_BASE 0xE0000200
+#define UART1_IO_BASE 0xE0000300
/* external Epson SG-615P */
#define BASE_BAUD 691200
diff -Nru a/arch/ppc/platforms/4xx/luan.h b/arch/ppc/platforms/4xx/luan.h
--- a/arch/ppc/platforms/4xx/luan.h 2005-03-12 22:45:06 -08:00
+++ b/arch/ppc/platforms/4xx/luan.h 2005-03-12 22:45:06 -08:00
@@ -47,9 +47,9 @@
#define RS_TABLE_SIZE 3
/* PIBS defined UART mappings, used before early_serial_setup */
-#define UART0_IO_BASE (u8 *) 0xa0000200
-#define UART1_IO_BASE (u8 *) 0xa0000300
-#define UART2_IO_BASE (u8 *) 0xa0000600
+#define UART0_IO_BASE 0xa0000200
+#define UART1_IO_BASE 0xa0000300
+#define UART2_IO_BASE 0xa0000600
#define BASE_BAUD 11059200
#define STD_UART_OP(num) \
diff -Nru a/arch/ppc/platforms/4xx/ocotea.h b/arch/ppc/platforms/4xx/ocotea.h
--- a/arch/ppc/platforms/4xx/ocotea.h 2005-03-12 22:45:06 -08:00
+++ b/arch/ppc/platforms/4xx/ocotea.h 2005-03-12 22:45:06 -08:00
@@ -56,8 +56,8 @@
#define RS_TABLE_SIZE 2
/* OpenBIOS defined UART mappings, used before early_serial_setup */
-#define UART0_IO_BASE (u8 *) 0xE0000200
-#define UART1_IO_BASE (u8 *) 0xE0000300
+#define UART0_IO_BASE 0xE0000200
+#define UART1_IO_BASE 0xE0000300
#define BASE_BAUD 11059200/16
#define STD_UART_OP(num) \
diff -Nru a/drivers/char/drm/drm_ioctl.c b/drivers/char/drm/drm_ioctl.c
--- a/drivers/char/drm/drm_ioctl.c 2005-03-12 22:45:06 -08:00
+++ b/drivers/char/drm/drm_ioctl.c 2005-03-12 22:45:06 -08:00
@@ -326,6 +326,8 @@
DRM_COPY_FROM_USER_IOCTL(sv, argp, sizeof(sv));
+ memset(&version, 0, sizeof(version));
+
dev->driver->version(&version);
retv.drm_di_major = DRM_IF_MAJOR;
retv.drm_di_minor = DRM_IF_MINOR;
diff -Nru a/drivers/media/video/adv7170.c b/drivers/media/video/adv7170.c
--- a/drivers/media/video/adv7170.c 2005-03-12 22:45:06 -08:00
+++ b/drivers/media/video/adv7170.c 2005-03-12 22:45:06 -08:00
@@ -130,7 +130,7 @@
u8 block_data[32];
msg.addr = client->addr;
- msg.flags = client->flags;
+ msg.flags = 0;
while (len >= 2) {
msg.buf = (char *) block_data;
msg.len = 0;
diff -Nru a/drivers/media/video/adv7175.c b/drivers/media/video/adv7175.c
--- a/drivers/media/video/adv7175.c 2005-03-12 22:45:06 -08:00
+++ b/drivers/media/video/adv7175.c 2005-03-12 22:45:06 -08:00
@@ -126,7 +126,7 @@
u8 block_data[32];
msg.addr = client->addr;
- msg.flags = client->flags;
+ msg.flags = 0;
while (len >= 2) {
msg.buf = (char *) block_data;
msg.len = 0;
diff -Nru a/drivers/media/video/bt819.c b/drivers/media/video/bt819.c
--- a/drivers/media/video/bt819.c 2005-03-12 22:45:06 -08:00
+++ b/drivers/media/video/bt819.c 2005-03-12 22:45:06 -08:00
@@ -146,7 +146,7 @@
u8 block_data[32];
msg.addr = client->addr;
- msg.flags = client->flags;
+ msg.flags = 0;
while (len >= 2) {
msg.buf = (char *) block_data;
msg.len = 0;
diff -Nru a/drivers/media/video/saa7110.c b/drivers/media/video/saa7110.c
--- a/drivers/media/video/saa7110.c 2005-03-12 22:45:06 -08:00
+++ b/drivers/media/video/saa7110.c 2005-03-12 22:45:06 -08:00
@@ -60,8 +60,10 @@
#define I2C_SAA7110 0x9C /* or 0x9E */
+#define SAA7110_NR_REG 0x35
+
struct saa7110 {
- unsigned char reg[54];
+ u8 reg[SAA7110_NR_REG];
int norm;
int input;
@@ -95,31 +97,28 @@
unsigned int len)
{
int ret = -1;
- u8 reg = *data++;
+ u8 reg = *data; /* first register to write to */
- len--;
+ /* Sanity check */
+ if (reg + (len - 1) > SAA7110_NR_REG)
+ return ret;
/* the saa7110 has an autoincrement function, use it if
* the adapter understands raw I2C */
if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
struct saa7110 *decoder = i2c_get_clientdata(client);
struct i2c_msg msg;
- u8 block_data[54];
- msg.len = 0;
- msg.buf = (char *) block_data;
+ msg.len = len;
+ msg.buf = (char *) data;
msg.addr = client->addr;
- msg.flags = client->flags;
- while (len >= 1) {
- msg.len = 0;
- block_data[msg.len++] = reg;
- while (len-- >= 1 && msg.len < 54)
- block_data[msg.len++] =
- decoder->reg[reg++] = *data++;
- ret = i2c_transfer(client->adapter, &msg, 1);
- }
+ msg.flags = 0;
+ ret = i2c_transfer(client->adapter, &msg, 1);
+
+ /* Cache the written data */
+ memcpy(decoder->reg + reg, data + 1, len - 1);
} else {
- while (len-- >= 1) {
+ for (++data, --len; len; len--) {
if ((ret = saa7110_write(client, reg++,
*data++)) < 0)
break;
@@ -192,7 +191,7 @@
return 0;
}
-static const unsigned char initseq[] = {
+static const unsigned char initseq[1 + SAA7110_NR_REG] = {
0, 0x4C, 0x3C, 0x0D, 0xEF, 0xBD, 0xF2, 0x03, 0x00,
/* 0x08 */ 0xF8, 0xF8, 0x60, 0x60, 0x00, 0x86, 0x18, 0x90,
/* 0x10 */ 0x00, 0x59, 0x40, 0x46, 0x42, 0x1A, 0xFF, 0xDA,
diff -Nru a/drivers/media/video/saa7114.c b/drivers/media/video/saa7114.c
--- a/drivers/media/video/saa7114.c 2005-03-12 22:45:06 -08:00
+++ b/drivers/media/video/saa7114.c 2005-03-12 22:45:06 -08:00
@@ -163,7 +163,7 @@
u8 block_data[32];
msg.addr = client->addr;
- msg.flags = client->flags;
+ msg.flags = 0;
while (len >= 2) {
msg.buf = (char *) block_data;
msg.len = 0;
diff -Nru a/drivers/media/video/saa7185.c b/drivers/media/video/saa7185.c
--- a/drivers/media/video/saa7185.c 2005-03-12 22:45:06 -08:00
+++ b/drivers/media/video/saa7185.c 2005-03-12 22:45:06 -08:00
@@ -118,7 +118,7 @@
u8 block_data[32];
msg.addr = client->addr;
- msg.flags = client->flags;
+ msg.flags = 0;
while (len >= 2) {
msg.buf = (char *) block_data;
msg.len = 0;
diff -Nru a/drivers/net/r8169.c b/drivers/net/r8169.c
--- a/drivers/net/r8169.c 2005-03-12 22:45:06 -08:00
+++ b/drivers/net/r8169.c 2005-03-12 22:45:06 -08:00
@@ -1683,16 +1683,19 @@
rtl8169_make_unusable_by_asic(desc);
}
-static inline void rtl8169_return_to_asic(struct RxDesc *desc, int rx_buf_sz)
+static inline void rtl8169_mark_to_asic(struct RxDesc *desc, u32 rx_buf_sz)
{
- desc->opts1 |= cpu_to_le32(DescOwn + rx_buf_sz);
+ u32 eor = le32_to_cpu(desc->opts1) & RingEnd;
+
+ desc->opts1 = cpu_to_le32(DescOwn | eor | rx_buf_sz);
}
-static inline void rtl8169_give_to_asic(struct RxDesc *desc, dma_addr_t mapping,
- int rx_buf_sz)
+static inline void rtl8169_map_to_asic(struct RxDesc *desc, dma_addr_t mapping,
+ u32 rx_buf_sz)
{
desc->addr = cpu_to_le64(mapping);
- desc->opts1 |= cpu_to_le32(DescOwn + rx_buf_sz);
+ wmb();
+ rtl8169_mark_to_asic(desc, rx_buf_sz);
}
static int rtl8169_alloc_rx_skb(struct pci_dev *pdev, struct sk_buff **sk_buff,
@@ -1712,7 +1715,7 @@
mapping = pci_map_single(pdev, skb->tail, rx_buf_sz,
PCI_DMA_FROMDEVICE);
- rtl8169_give_to_asic(desc, mapping, rx_buf_sz);
+ rtl8169_map_to_asic(desc, mapping, rx_buf_sz);
out:
return ret;
@@ -2150,7 +2153,7 @@
skb_reserve(skb, NET_IP_ALIGN);
eth_copy_and_sum(skb, sk_buff[0]->tail, pkt_size, 0);
*sk_buff = skb;
- rtl8169_return_to_asic(desc, rx_buf_sz);
+ rtl8169_mark_to_asic(desc, rx_buf_sz);
ret = 0;
}
}
diff -Nru a/drivers/net/sis900.c b/drivers/net/sis900.c
--- a/drivers/net/sis900.c 2005-03-12 22:45:06 -08:00
+++ b/drivers/net/sis900.c 2005-03-12 22:45:06 -08:00
@@ -236,7 +236,7 @@
signature = (u16) read_eeprom(ioaddr, EEPROMSignature);
if (signature == 0xffff || signature == 0x0000) {
printk (KERN_INFO "%s: Error EERPOM read %x\n",
- net_dev->name, signature);
+ pci_name(pci_dev), signature);
return 0;
}
@@ -268,7 +268,7 @@
if (!isa_bridge)
isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0018, isa_bridge);
if (!isa_bridge) {
- printk("%s: Can not find ISA bridge\n", net_dev->name);
+ printk("%s: Can not find ISA bridge\n", pci_name(pci_dev));
return 0;
}
pci_read_config_byte(isa_bridge, 0x48, ®);
@@ -456,10 +456,6 @@
net_dev->tx_timeout = sis900_tx_timeout;
net_dev->watchdog_timeo = TX_TIMEOUT;
net_dev->ethtool_ops = &sis900_ethtool_ops;
-
- ret = register_netdev(net_dev);
- if (ret)
- goto err_unmap_rx;
/* Get Mac address according to the chip revision */
pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &revision);
@@ -476,7 +472,7 @@
if (ret == 0) {
ret = -ENODEV;
- goto err_out_unregister;
+ goto err_unmap_rx;
}
/* 630ET : set the mii access mode as software-mode */
@@ -486,7 +482,7 @@
/* probe for mii transceiver */
if (sis900_mii_probe(net_dev) == 0) {
ret = -ENODEV;
- goto err_out_unregister;
+ goto err_unmap_rx;
}
/* save our host bridge revision */
@@ -496,6 +492,10 @@
pci_dev_put(dev);
}
+ ret = register_netdev(net_dev);
+ if (ret)
+ goto err_unmap_rx;
+
/* print some information about our NIC */
printk(KERN_INFO "%s: %s at %#lx, IRQ %d, ", net_dev->name,
card_name, ioaddr, net_dev->irq);
@@ -505,8 +505,6 @@
return 0;
- err_out_unregister:
- unregister_netdev(net_dev);
err_unmap_rx:
pci_free_consistent(pci_dev, RX_TOTAL_SIZE, sis_priv->rx_ring,
sis_priv->rx_ring_dma);
@@ -533,6 +531,7 @@
static int __init sis900_mii_probe(struct net_device * net_dev)
{
struct sis900_private * sis_priv = net_dev->priv;
+ const char *dev_name = pci_name(sis_priv->pci_dev);
u16 poll_bit = MII_STAT_LINK, status = 0;
unsigned long timeout = jiffies + 5 * HZ;
int phy_addr;
@@ -582,21 +581,20 @@
mii_phy->phy_types =
(mii_status & (MII_STAT_CAN_TX_FDX | MII_STAT_CAN_TX)) ? LAN : HOME;
printk(KERN_INFO "%s: %s transceiver found at address %d.\n",
- net_dev->name, mii_chip_table[i].name,
+ dev_name, mii_chip_table[i].name,
phy_addr);
break;
}
if( !mii_chip_table[i].phy_id1 ) {
printk(KERN_INFO "%s: Unknown PHY transceiver found at address %d.\n",
- net_dev->name, phy_addr);
+ dev_name, phy_addr);
mii_phy->phy_types = UNKNOWN;
}
}
if (sis_priv->mii == NULL) {
- printk(KERN_INFO "%s: No MII transceivers found!\n",
- net_dev->name);
+ printk(KERN_INFO "%s: No MII transceivers found!\n", dev_name);
return 0;
}
@@ -621,7 +619,7 @@
poll_bit ^= (mdio_read(net_dev, sis_priv->cur_phy, MII_STATUS) & poll_bit);
if (time_after_eq(jiffies, timeout)) {
printk(KERN_WARNING "%s: reset phy and link down now\n",
- net_dev->name);
+ dev_name);
return -ETIME;
}
}
@@ -691,7 +689,7 @@
sis_priv->mii = default_phy;
sis_priv->cur_phy = default_phy->phy_addr;
printk(KERN_INFO "%s: Using transceiver found at address %d as default\n",
- net_dev->name,sis_priv->cur_phy);
+ pci_name(sis_priv->pci_dev), sis_priv->cur_phy);
}
status = mdio_read(net_dev, sis_priv->cur_phy, MII_CONTROL);
diff -Nru a/drivers/net/via-rhine.c b/drivers/net/via-rhine.c
--- a/drivers/net/via-rhine.c 2005-03-12 22:45:06 -08:00
+++ b/drivers/net/via-rhine.c 2005-03-12 22:45:06 -08:00
@@ -1899,6 +1899,9 @@
struct rhine_private *rp = netdev_priv(dev);
void __iomem *ioaddr = rp->base;
+ if (!(rp->quirks & rqWOL))
+ return; /* Nothing to do for non-WOL adapters */
+
rhine_power_init(dev);
/* Make sure we use pattern 0, 1 and not 4, 5 */
diff -Nru a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c
--- a/drivers/pci/hotplug/pciehp_ctrl.c 2005-03-12 22:45:06 -08:00
+++ b/drivers/pci/hotplug/pciehp_ctrl.c 2005-03-12 22:45:06 -08:00
@@ -1354,10 +1354,11 @@
dbg("PCI Bridge Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n",
ctrl->seg, func->bus, func->device, func->function);
bridge_slot_remove(func);
- } else
+ } else {
dbg("PCI Function Hot-Remove s:b:d:f(%02x:%02x:%02x:%02x)\n",
ctrl->seg, func->bus, func->device, func->function);
slot_remove(func);
+ }
func = pciehp_slot_find(ctrl->slot_bus, device, 0);
}
diff -Nru a/fs/cramfs/inode.c b/fs/cramfs/inode.c
--- a/fs/cramfs/inode.c 2005-03-12 22:45:06 -08:00
+++ b/fs/cramfs/inode.c 2005-03-12 22:45:06 -08:00
@@ -70,6 +70,7 @@
inode->i_data.a_ops = &cramfs_aops;
} else {
inode->i_size = 0;
+ inode->i_blocks = 0;
init_special_inode(inode, inode->i_mode,
old_decode_dev(cramfs_inode->size));
}
diff -Nru a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c
--- a/net/ipv4/tcp_timer.c 2005-03-12 22:45:06 -08:00
+++ b/net/ipv4/tcp_timer.c 2005-03-12 22:45:06 -08:00
@@ -38,6 +38,7 @@
#ifdef TCP_DEBUG
const char tcp_timer_bug_msg[] = KERN_DEBUG "tcpbug: unknown timer value\n";
+EXPORT_SYMBOL(tcp_timer_bug_msg);
#endif
/*Источник этой новости Центр информации по операционным системам
( http://www.osrc.info/news.php?extend.2121 )