Новость: Вышел Linux 2.4.30-pre3
(Категория: Linux)
Добавил Roman I Khimov
Четверг, 10 Март 2005, 02:43
А для тех, кто не спешит с переходом на ветку ядра Linux 2.6.x.(y), Марсело Тосатти (Marcelo Tosatti) приготовил третью предварительную версию ядра 2.4.30. В нее вошло множество разбросанных по коду исправлений, из которых выделить можно обновление драйвера e1000, обратный порт исправления для nForce и обновление SATA.
Патч Linux 2.4.29 -> 2.4.30-pre3 (85 КБ), 2.4.29-pre2 -> 2.4.29-pre3 (31 КБ).
Changelog следует далее:
Summary of changes from v2.4.30-pre2 to v2.4.30-pre3
============================================
<davem:northbeach.davemloft.net.davemloft.net>:
o [SPARC64]: Tomatillo PCI controller bug fixes
o [TIGON3]: Do not touch NIC_SRAM_FIRMWARE_MBOX when TG3_FLG2_SUN_570X
o [TIGON3]: Update driver version and reldate
<hifumi.hisashi:lab.ntt.co.jp>:
o BUG on error handlings in Ext3 under I/O
<krzysztof.h1:wp.pl>:
o [SPARC]: DBRI fixes and improvements
<liml:rtr.ca>:
o sata_qstor: eh_timeout fix
<mallikarjuna.chilakala:intel.com>:
o e1000: 1 Robert Olsson's fix and
o e1000: 2 use netif_poll_{enable|disable}
o e1000: Avoid race between e1000_watchdog
o e1000: Delay clean-up of last Tx buffer
o e1000: Fix WOL settings in 82544 based
o e1000: Patch from Peter Kjellstroem --
o e1000: Checks for desc ring/rx data
o e1000: Report failure code when loopback
o e1000: Fixes related to Cable length
o e1000: Driver version white space,
<mat.loikkanen:synopsys.com>:
o [libata] add ->bmdma_{stop,status} hooks
<phil:fifi.org>:
o sk98lin workaround Asus K8V SE Deluxe buggy firmware
<slee:netengine1.com>:
o Fix units/partition count in sd.c
Adrian Bunk:
o drivers/scsi/sata_*: make code static
David S. Miller:
o [SPARC64]: Fix 32bit compat layer bugs in sys_ipc() and sys_rt_sigtimedwait()
o [AF_UNIX]: Fix SIOCINQ for STREAM
o [SPARC64]: Accept 'm5823' clock chip as seen on SB1500
Jeff Garzik:
o [libata sata_via] minor cleanups
o [libata sata_via] add support for VT6421 SATA
o [libata] resync with 2.6 msleep() updates
o [libata] trivial: whitespace sync with 2.6
o [libata] do not call pci_disable_device() for certain errors
o [libata] Add missing hooks, to avoid oops in advanced SATA drivers
o [libata] Use DMA_{32,64}BIT_MASK in ahci, sata_vsc drivers
o [libata ahci] Print out port id on error messages
o [libata] remove_one helper cleanup
John W. Linville:
o libata: fix command queue leak when xlat_func fails
o tulip: make tulip_stop_rxtx() wait for DMA to fully stop
Marcelo Tosatti:
o Cset exclude: solar**AT**openwall.com|ChangeSet|20041125155150|65356
o Allow lseek on SCSI tapes
o Allow lseek on osst to keep tar --verify happy
o Change VERSION to 2.4.30-pre3
o Early ACPI PCI quirk depends on CONFIG_X86_IO_APIC
Mark Lord:
o sata_qstor: new basic driver for Pacific Digital
o [libata qstor] minor update per LKML comments
Matt Domsch:
o aic7xxx: don't reset chip on pause
Mikael Pettersson:
o fix undefined behaviour in cistpl.c
Paul Fulghum:
o fix synclinkmp register access typo
Solar Designer:
o Fix for swapoff after re-creating device files
o Fix proc_tty.c comment typos
Zwane Mwaikambo:
o Fix timer override on nforce
Источник этой новости Центр информации по операционным системам
( http://www.osrc.info/news.php?extend.2113 )