Центр информации по операционным системам: Контент / Статьи / Формат сегмента данных BIOS

Добро пожаловать,

Свежие материалы

Производительность программных RAID-массивов из разных дисков в Linux
bullet

Лицензия раздора
bullet

Патч Reiser4 для Linux 2.6.22
bullet

Подготовка к экзамену LPI Linux.
bullet

Архитектура файловой системы UFS2

Обсуждения

Микропроцессор "Эверест" (1)
bullet

Запрет регистрации на osrc.info (1)
bullet

Ответ Javе и Flash'у (70)
bullet

Новая программа поддержки от Microsoft (2)
bullet

Solaris будет портирован на Itanium и POWER? (3)
bullet

9 декабря вышла новая сборка Xameleon (9)
bullet

рассылка (2)
bullet

ЗРОС (3)

Новый стиль OSRC.info (2)
bullet

Обсуждение статьи "Взгляд на развитие YellowTAB" (124)

В Сети

Гостей: 6, Пользователей: 0 ...

рекорд он-лайн: 2015
(Пользователей: 1, Гостей: 2014) в 29.03.2010 00:07

Пользователей: 1007
Новичок: alicemokas

Формат сегмента данных BIOS

Format of BIOS Data Segment at segment 40h
на Вторник, 29 Июнь 2004, 20:07
добавил: Roman I Khimov

категория Статьи
комментарии: 0
просмотров: 848

<img src=themes/OSRC.info/images/flag_en.gif alt=English title=На английском языке! /> Информация о том, что, как и где хранится в сегменте данных BIOS.

<pre>
Format of BIOS Data Segment at segment 40h:
{items in curly braces not documented by IBM}
Offset Size Description
00h WORD Base I/O address of 1st serial I/O port, zero if none
02h WORD Base I/O address of 2nd serial I/O port, zero if none
04h WORD Base I/O address of 3rd serial I/O port, zero if none
06h WORD Base I/O address of 4th serial I/O port, zero if none
Note: Above fields filled in turn by POST as it finds serial
ports. POST never leaves gaps. DOS and BIOS serial device
numbers may be redefined by re-assigning these fields.
08h WORD Base I/O address of 1st parallel I/O port, zero if none
0Ah WORD Base I/O address of 2nd parallel I/O port, zero if none
0Ch WORD Base I/O address of 3rd parallel I/O port, zero if none
0Eh WORD [non-PS] Base I/O address of 4th parallel I/O port, zero if none
[PS] Segment of Extended BIOS Data Segment
Note: Above fields filled in turn by POST as it finds
parallel ports. POST never leaves gaps. DOS and BIOS
parallel device numbers may de redefined by re-assigning
these fields.
10h WORD Installed hardware:
bits 15-14: number of parallel devices
bit 13: [Conv] Internal modem
bit 12: reserved
bits 11- 9: number of serial devices
bit 8: reserved
bits 7- 6: number of diskette drives minus one
bits 5- 4: Initial video mode:
00b = EGA,VGA,PGA
01b = 40 x 25 color
10b = 80 x 25 color
11b = 80 x 25 mono
bit 3: reserved
bit 2: [PS] =1 if pointing device
[non-PS] reserved
bit 1: =1 if math co-processor
bit 0: =1 if diskette available for boot
12h BYTE [Conv] POST status
[AT] {Manufacturing test initialisation flags}
13h WORD Base memory size in kbytes (0-640)
15h BYTE [AT] {Manufacturing test scratch pad}
16h BYTE [AT] {Manufacturing test scratch pad}
[PS/2 Mod 30] BIOS control flags
17h BYTE Keyboard status flags 1:
bit 7 =1 INSert active
bit 6 =1 Caps Lock active
bit 5 =1 Num Lock active
bit 4 =1 Scroll Lock active
bit 3 =1 either Alt pressed
bit 2 =1 either Ctrl pressed
bit 1 =1 Left Shift pressed
bit 0 =1 Right Shift pressed
18h BYTE Keyboard status flags 2:
bit 7 =1 INSert pressed
bit 6 =1 Caps Lock pressed
bit 5 =1 Num Lock pressed
bit 4 =1 Scroll Lock pressed
bit 3 =1 Pause state active
bit 2 =1 Sys Req pressed
bit 1 =1 Left Alt pressed
bit 0 =1 Left Ctrl pressed
19h BYTE Keyboard: Alt-nnn keypad workspace
1Ah WORD Keyboard: ptr to next character in keyboard buffer
1Ch WORD Keyboard: ptr to first free slot in keyboard buffer
1Eh 16 WORDs Keyboard circular buffer (but see 80h, 82h for override)
3Eh BYTE Diskette recalibrate status:
bit 7 =1 Diskette hardware interrupt occurred
bits 6-4 reserved
bit 3 =1 Recalibrate diskette 3
bit 2 =1 Recalibrate diskette 2
bit 1 =1 Recalibrate diskette 1
bit 0 =1 Recalibrate diskette 0
3Fh BYTE Diskette motor status:
bit 7 =1 current operation is write or format
=0 current operation is read or verify
bit 6 reserved
bits 5-4 diskette drive number selected (0-3)
bit 3 =1 diskette 3 motor on
bit 2 =1 diskette 2 motor on
bit 1 =1 diskette 1 motor on
bit 0 =1 diskette 0 motor on
40h BYTE Diskette motor turn-off time-out count
41h BYTE Diskette last operation status (0 = OK)
bit 7 =1 drive not ready
bit 6 =1 seek error
bit 5 =1 general controller failure
bits 4-0:
00h no error
01h invalid request
02h address mark not found
03h write-protect error
04h sector not found
06h diskette change line active
08h DMA overrun
09h DMA across 64k boundary
0Ch media type unknown
10h CRC error on read
42h 7 BYTEs Diskette/Fixed disk status/command bytes
49h BYTE Video current mode
4Ah WORD Video columns on screen
4Ch WORD Video page (regen buffer) size in bytes
4Eh WORD Video current page start address in regen buffer
50h 16 BYTEs Video cursor position (col, row) for eight pages, 0 based
60h WORD Video cursor type, 6845 compatible, hi=startline, lo=endline
62h BYTE Video current page number
63h WORD Video CRT controller base address: color=03D4h, mono=03B4h
65h BYTE Video current setting of mode select register 03D8h/03B8h
66h BYTE Video current setting of CGA palette register 03D9h
67h DWORD POST real mode re-entry point after certain resets
6Bh BYTE POST last unexpected interrupt
6Ch DWORD Timer ticks since midnight
70h BYTE Timer overflow, non-zero if has counted past midnight
71h BYTE Ctrl-Break flag: bit 7=1
72h WORD POST reset flag:
= 1234h if to bypass memory test (warm boot)
= 4321h [PS/2 MCA only] if to preserve memory
= 5678h [Conv] system suspended
= 9ABCh [Conv] manufacturing test mode
= ABCDh [Conv] POST loop mode
= 64h Burn-in mode
74h BYTE Fixed disk last operation status: {except ESDI drives}
00h no error
01h invalid function request
02h address mark not found
03h write protect error
04h sector not found
05h reset failed
07h drive parameter activity failed
08h DMA overrun
09h DMA data boundary error
0Ah bad sector flag detected
0Bh bad track detected
0Dh invalid number of sectors for Format
0Eh control data address mark detected
0Fh DMA arbitration level out of range
10h uncorrectable ECC or CRC error
11h ECC corrected data error
20h general controller failed
40h seek failed
80h time out
AAh drive not ready
BBh undefined error
CCh write fault on selected drive
E0h status error/error register is zero
FFh sense failed
75h BYTE Fixed disk: number of fixed disk drives
76h BYTE Fixed disk: control byte {IBM document only for XT}
77h BYTE Fixed disk: I/O port offset {IBM document only for XT}
78h 3 BYTEs Parallel devices 1-3 time-out counters
7Bh BYTE parallel device 4 time-out counter [non-PS]
bit 5 set if Virtual DMA Spec supported [PS] (see INT 4B)
7Ch 4 BYTEs Serial devices 1-4 time-out counters
80h WORD Keyboard buffer start as offset from segment 40h (normally 1Eh)
82h WORD Keyboard buffer end+1 as offset from segment 40h (normally 3Eh)
[XT BIOS dated 11/08/82 ends here]
84h BYTE Video EGA/MCGA/VGA rows on screen minus one
85h WORD Video EGA/MCGA/VGA character height in scan-lines
87h BYTE Video EGA/VGA control: [MCGA: =00h]
bit 7: =1 if not to clear RAM (see INT 10h, AH=00h)
bits 6-5: RAM on adapter = (this field + 1) * 64K
bit 4: reserved
bit 3: =0 if EGA/VGA video system active, =1 if inactive
bit 2: =1 if to wait for display enable (what means this?)
bit 1: =0 for color or ECD monitor, =1 for mono monitor
bit 0: =0 alphanumeric cursor emulation enabled, =1 not.
When enabled, text mode cursor size (INT 10,AH=01h)
settings looking like CGA ones are translated to
equivalent EGA/VGA ones.
88h BYTE Video EGA/VGA switches: [MCGA: reserved]
bits 7-4: power-on state of feature connector bits 3-0
bits 3-0: configuration switches 4-1 (=0 on, =1 off)
Values as read:
0h Pri MDA, Sec EGA+old color display 40 x 25
1h Pri MDA, Sec EGA+old color display 80 x 25
2h Pri MDA, Sec EGA+ECD normal mode (CGA emul)
3h Pri MDA, Sec EGA+ECD enhanced mode
4h Pri CGA 40 x 25, Sec EGA mono display
5h Pri CGA 80 x 25, Sec EGA mono display
6h Pri EGA+old color display 40 x 25, Sec MDA
7h Pri EGA+old color display 80 x 25, Sec MDA
8h Pri EGA+ECD normal mode (CGA emul), Sec MDA
9h Pri EGA+ECD enhanced mode, Sec MDA
Ah Pri EGA mono display, Sec CGA 40 x 25
Bh Pri EGA mono display, Sec CGA 80 x 25
When bit4 of 40h:89h is 0, VGA emulates 350-line EGA if
this byte is x3h or x9h, otherwise emulates 200-line CGA in
400-line double scan. VGA resets this byte to x9h after the
mode set.
89h BYTE Video MCGA/VGA mode-set option control:
bits 7 and 4:
0 0 350-line mode requested
0 1 400-line mode at next mode set
1 0 200-line mode requested
1 1 reserved
Apparently VGA BIOS mode set disregards bit 7 and uses
byte 40h:88h to determine 200/350 selection when bit 4
is zero. Presumably bit 7 is a convenience for other
purposes. Bit 7 is reset to zero after the mode set.
bit 6: =1 if display switching enabled, =0 if disabled
bit 5: reserved
bit 4: [VGA] =1 if to use 400-line mode at next mode set
=0 if to emulate EGA at next mode set
This bit set to 1 after the mode set.
[MCGA] =1 use 400-line mode at next mode set
=0 emulate CGA, digital monitor, 200 lines,
8 x 8 text font at next mode set
Bit unchanged by mode set.
bit 3: =0 if default palette loading enabled at mode set
bit 2: =1 if mono display, =0 if color display
bit 1: =1 if gray scale summing enabled, =0 if disabled
bit 0: [VGA] =1 if VGA active, =0 if not
[MCGA] reserved, zero
8Ah BYTE Video [MCGA/VGA]: index into Display Combination Code table
8Bh BYTE Diskette media control [not XT]:
bits 7-6: Last data rate set by controller:
00=500kbps, 01=300kbps, 10=250kbps, 11=reserved
bits 5-4: Last diskette drive step rate selected
bits 3-2: {Data rate at start of operation}
bits 1-0: reserved
8Ch BYTE Fixed disk controller status [not XT]
8Dh BYTE Fixed disk controller Error Status [not XT]
8Eh BYTE Fixed disk Interrupt Control [not XT]
8Fh BYTE Diskette controller information [not XT]:
bit 7: reserved
bit 6: =1 drive 1 determined
bit 5: =1 drive 1 is multi-rate, valid if drive determined
bit 4: =1 drive 1 supports 80 tracks, always valid
bit 3: reserved
bit 2: =1 drive 0 determined
bit 1: =1 drive 0 is multi-rate, valid if drive determined
bit 0: =1 drive 0 supports 80 tracks, always valid
90h BYTE Diskette drive 0 media state
91h BYTE Diskette drive 1 media state
bits 7-6: Data rate: 00=500kbps, 01=300kbps, 10=250kbps
bit 5: =1 if double stepping reqd (e.g. 360kB in 1.2MB)
bit 4: =1 if media established
bit 3: reserved
bits 2-0: on exit from BIOS, contain:
000 trying 360kB in 360kB
001 trying 360kB in 1.2MB
010 trying 1.2MB in 1.2MB
011 360kB in 360kB established
100 360kB in 1.2MB established
101 1.2MB in 1.2MB established
110 reserved
111 all other formats/drives
92h BYTE Diskette drive 0 media state at start of operation
93h BYTE Diskette drive 1 media state at start of operation
94h BYTE Diskette drive 0 current track number
95h BYTE Diskette drive 1 current track number
96h BYTE Keyboard status byte 3
bit 7 =1 read-ID in progress
bit 6 =1 last code read was first of two ID codes
bit 5 =1 force Num Lock if read-ID and enhanced keyboard
bit 4 =1 enhanced keyboard installed
bit 3 =1 Right Alt pressed
bit 2 =1 Right Ctrl pressed
bit 1 =1 last code read was E0h
bit 1 =1 last code read was E1h
97h BYTE Keyboard status byte 2
bit 7 =1 keyboard transmit error flag
bit 6 =1 LED update in progress
bit 5 =1 RESEND received from keyboard
bit 4 =1 ACK received from keyboard
bit 3 reserved, must be zero
bit 2 Caps Lock LED
bit 1 Num Lock LED
bit 0 Scroll Lock LED
98h DWORD Timer2: [AT, PS exc Mod 30] ptr to user wait-complete flag
(see INT 15, AX=8300h)
9Ch DWORD Timer2: [AT, PS exc Mod 30] user wait count in microseconds
A0h BYTE Timer2: [AT, PS exc Mod 30] Wait active flag:
bit 7 =1 wait time elapsed
bits 6-1 reserved
bit 0 =1 INT 15h, AH=86h has occurred
A1h 7 BYTEs reserved for network adapters (oh really?)
A4h DWORD [PS/2 Mod 30] Saved Fixed Disk Interrupt Vector
A8h DWORD Video: EGA/MCGA/VGA ptr to Video Save Pointer Table (see below)
ACh-AFh reserved
B0h DWORD ptr to 3363 Optical disk driver or BIOS entry point.
When 3363 BIOS present, the signature "OPTIC ",00h occurs 3
bytes beyond this entry point.
When 3363 BIOS and 3363 File System Driver present, the
signature "FILE SYSTEM DRIVER",00h occurs 3 bytes beyond
this entry point.
B4h WORD reserved
B6h 3 BYTEs reserved for POST?
B9h 7 BYTEs ???
C0h 14 BYTEs reserved
CEh WORD count of days since last boot?
D0h-EFh reserved
F0h-FFh reserved for user
100h BYTE Print Screen Status byte

Format of Extended BIOS Data Area (see 40:0Eh for ptr) [PS only]
Offset Size Description
00h BYTE Length of EBDA in kilobytes
01h 15 BYTEs reserved
17h BYTE Number of entries in POST error log (0-5)
18h 5 WORDs POST error log (each word is a POST error number)
19h-21h reserved
22h DWORD Pointing Device Driver entry point
26h BYTE Pointing Device Flags 1
bit 7: =1 command in progress
bit 6: =1 resend
bit 5: =1 acknowledge
bit 4: =1 error
bit 3: =0 reserved
bits 2-0: index count
27h BYTE Pointing Device Flags 2
bit 7: =1 device driver far call flag
bits 6-3: reserved
bits 2-0: package size
28h 7 BYTEs Pointing Device Auxiliary Device Data
2Fh BYTE reserved
30h DWORD Vector for INT 07h stored here during 80387 interrupt
34h DWORD Vector for INT 01h stored here during INT 07h emulation
38h BYTE Scratchpad for 80287/80387 interrupt code
39h WORD Timer3: Watchdog timer initial count
3Bh BYTE ??? seen non-zero on Model 30
3Ch BYTE ???
3Dh 16 BYTEs Fixed Disk parameter table for drive 0 (oh really?)
4Dh 16 BYTEs Fixed Disk parameter table for drive 1 (oh really?)
Neither of above seen on any Model 30, 50, 60 yet.
5Dh-6Bh ???
6Ch BYTE Fixed disk: (=FFh on ESDI systems)
bits 7-4: Channel number 00-0Fh
bits 3-0: DMA arbitration level 00-0Eh
6Dh and up: ??? seen non-zero on Model 60
3F0h BYTE Fixed disk buffer (???!!!)

Format of Video Save Pointer Table [EGA/VGA/MCGA only]:
Offset Size Description
00h DWORD ptr to Video Parameter Table
04h DWORD ptr to Parameter Dynamic Save Area, else 0 [EGA/VGA only]
08h DWORD ptr to Alphanumeric Character Set Override, else 0
0Ch DWORD ptr to Graphics Character Set Override, else 0
10h DWORD [VGA only] ptr to Secondary Save Pointer Table, must be valid
14h DWORD reserved, zero
18h DWORD reserved, zero
Note: table initially in ROM, copy to RAM to alter, then update 40h:A8h.

Format of Secondary Video Save Pointer Table [VGA only]:
Offset Size Description
00h WORD Length of this table in bytes, including this word (1Ah)
02h DWORD ptr to Display Combination Code Table, must be valid
06h DWORD ptr to second Alphanumeric Character Set Override, else 0
0Ah DWORD ptr to User Palette Profile Table, else 0
0Eh DWORD reserved, zero
12h DWORD reserved, zero
16h DWORD reserved, zero
Note: table initially in ROM, copy to RAM to alter, then alter Save Ptr Table.

Format of Video Parameter Table [EGA, VGA only]:
An array of 23 [EGA] or 29 [VGA] elements, each element being 64 bytes long.
Elements appear in the order:
00h-03h Modes 00h-03h in 200-line CGA emulation mode
04h-0Eh Modes 04h-0Eh
0Fh-10h Modes 0Fh-10h when only 64kB RAM on adapter
11h-12h Modes 0Fh-10h when >64kB RAM on adapter
13h-16h Modes 00h-03h in 350-line mode
17h VGA Modes 00h or 01h in 400-line mode
18h VGA Modes 02h or 03h in 400-line mode
19h VGA Mode 07h in 400-line mode
1Ah-1Ch VGA Modes 11h-13h

Format of Video Parameter Table element [EGA, VGA only]:
Offset Size Description
00h BYTE Columns on screen (see 40h:4Ah)
01h BYTE Rows on screen minus one (see 40h:84h)
02h BYTE Height of character in scan lines (see 40h:85h)
03h WORD Size of video buffer (see 40h:4Ch)
05h 4 BYTEs Values for Sequencer Registers 1-4
09h BYTE Value for Miscellaneous Output Register
0Ah 25 BYTEs Values for CRTC Registers 00h-18h
23h 20 BYTEs Values for Attribute Controller Registers 00h-13h
37h 9 BYTEs Values for Graphics Controller Registers 00h-08h

Format of Video Parameter Table [MCGA only] {guesswork from inspection}:
- 16 triplet BYTEs of R,G,B DAC info for 16 colors;
- An array of 11 elements, each element being 32 bytes long.
Elements appear in the order:
Modes 00h,01h in 200-line mode for digital displays
Modes 00h,01h in 400-line mode for analog displays
Modes 02h,03h in 200-line mode for digital displays
Modes 02h,03h in 400-line mode for analog displays
Modes 04h,05h in 200-line mode for digital displays
Modes 04h,05h in 400-line mode for analog displays
Mode 06h in 200-line mode for digital displays
Mode 06h in 400-line mode for analog displays
Mode 11h
Mode 13h in 200-line mode for digital displays
Mode 13h in 400-line mode for analog displays

Format of Video Parameter Table element [MCGA only]:
Offset Size Description
00h BYTE Columns on screen (see 40h:4Ah)
01h BYTE Rows on screen minus one (see 40h:84h)
02h BYTE Height of character in scan lines (see 40h:85h)
03h WORD Size of video buffer (see 40h:4Ch)
05h WORD ??? always zero
07h 21 BYTEs Video data registers 00h-14h to port 3D5h indexed by 3D4h
1Ch BYTE PEL Mask to port 3C6h
1Dh BYTE CGA Mode Control to port 3D8h
1Eh BYTE CGA Border Control to port 3D9h
1Fh BYTE Extended Mode Control to port 3DDh

Format of Video Parameter Dynamic Save Area [EGA, VGA only]:
Offset Size Description
00h 16 BYTEs Last data written to Attribute Controller Palette Registers 0-15
10h BYTE Last data written to Attribute Controller Overscan Register
11h-FFh Reserved
Note: Need for table was that EGA registers were write-only.
Note: If default values (from the Video Parameter Table) are
over-ridden at a mode set by the VGA User Palette Profile
Table, then the Dynamic Save Area is updated with the
default values, not the User Profile ones.

Format of Alphanumeric Character Set Override:
Offset Size Description
00h BYTE Length in bytes of each character in font table
01h BYTE Character generator RAM bank to load, 0=normal
02h WORD Number of characters in font table, normally 256
04h WORD Code of first character in font table, normally 0
06h DWORD ptr to font table
0Ah BYTE Displayable rows (FFh=use maximum calculated value)
0Bh BYTEs Array of mode values to which this font is to pertain
BYTE FFh end of array

Format of Second Alphanumeric Character Set Override:
Authorities differ, some say same as first override above, but IBM say:
Offset Size Description
00h BYTE Length in bytes of each character in font table
01h BYTE Character generator RAM bank to load, normally non-zero
02h BYTE reserved
03h DWORD ptr to font table
07h BYTEs Array of mode values to which this font is to pertain
BYTE FFh end of array

Format of Graphics Character Set Override:
Offset Size Description
00h BYTE Number of displayable character rows
01h WORD Length in bytes of each character in font table
03h DWORD ptr to font table
07h BYTEs Array of mode values to which this font is to pertain
BYTE FFh end of array

Format of Display Combination Code Table [VGA only]:
Offset Size Description
00h BYTE Number of entries in the DCC table at offset 04h
01h BYTE Version number
02h BYTE Maximum display type code that can appear in DCC table
03h BYTE reserved
04h ARRAY OF 2 BYTEs Each pair of bytes gives a valid display combination
Meaning of each byte:
00h no display
01h MDA with mono display
02h CGA with color display
03h reserved
04h EGA with color display
05h EGA with mono display
06h Professional Graphics Controller
07h VGA with mono display
08h VGA with color display
09h reserved
0Ah MCGA with digital color display
0Bh MCGA with analog mono display
0Ch MCGA with analog color display
FFh unrecognised video system

Format of User Palette Profile Table [VGA only]:
Offset Size Description
00h BYTE Underlining: 01h=enable in all alphanumeric modes
00h=enable in monochrome alphanumeric modes only
FFh=disable in all alphanumeric modes
01h BYTE reserved
02h WORD reserved
04h WORD Number (0-17) of Attribute Controller registers in table
06h WORD Index (0-16) of first Attribute Controller register in table
08h DWORD ptr to table of Attribute Controller registers to override
Table is an array of BYTEs.
0Ch WORD Number (0-256) of video DAC Color registers in table
0Eh WORD Index (0-255) of first video DAC Color register in table
10h DWORD ptr to table of video DAC Color registers to override
Table is ??? triplets ??? of BYTEs???
14h BYTEs array of mode values to which this profile is to pertain
BYTE FFh end of array

</pre>

Комментарии доступны только авторизованным пользователям, авторизуйтесь или зарегистрируйтесь на сайте здесь